Accora FloorBed 2, Инструкция по эксплуатации

Страница: 11 / 19

© Accora: 01223 206100 | info@accora.uk.com | www.accora.uk.com
11
14. Moving and Repositioning
1. Ensure the bed is at the Safety Stop position (see
Section 9, point b).
2. Disconnect the power.
3. Secure the handset, power supply and all cables to
prevent damage.
4. Unlock the castors and move the bed.
5. When the bed has been moved or repositioned
lock al the castors and follow the instruction in
Section 8
6. When the bed has been positioned correctly, follow
the instructions in Section 9.
15. Cleaning & Disinfection
Cleaning Information:
In order to disinfect the bed, only use detergents
designed for use in healthcare. Do not use abrasives,
scourers or other materials that could damage the
coating. Do not use corrosives, caustics or strong acids.
Do not use detergents that could alter the structure or
behaviour of the plastics (petrol etc.).
Clean by wiping with a damp and properly wrung
cloth.
The bed is not designed for maintenance in automatic
bed washers or for cleaning with pressurised water,
spraying, showering or steam cleaning.
Accora cannot be liable for any damage or risk of
damage if inappropriate cleaning or disinfectant
agents are used.
Cleaning procedure:
1.
Remove all accessories, mattress etc.
2. Adjust the mattress platform to the highest position
and adjust the position of the Backrest and Footrest
to provide access for cleaning all the platform
parts.
3. Disconnect the bed from the power supply.
4. Move the bed to where cleaning will take place
and lock the bed brakes.
5. Clean as described in the “Cleaning Information”.
16. Troubleshooting
The FloorBed does not function correctly:
1.
Is the ‘Power on’ indicator light on the handset lit? If
not:
a.
Is the power supply plugged in and turned on?
b. Is the power lead in-line socket plugged in
correctly?
c. If the ‘Power on’ indicator light is still not lit,
contact Accora for further advice.
2. If the ‘Power on’ indicator light is on, has the
handset been unlocked? If not, refer to Section 8.
3. If the handset has been unlocked and the FloorBed
still does not function correctly, contact Accora for
further advice.
If the FloorBed does not stop at the Safety-stop
position, check the main lift actuators are correctly
plugged in at all points between the actuator and the
control box.
If the FloorBed still does not function correctly, contact
Accora for further advice.
WARNING
Moving or repositioning MUST be carried out
by a competent person.
All functions MUST be tested and approved by
a competent person after moving or
repositioning
Only power supply supplied with bed should
be used.
Do not move the bed in the Floor-Level
position
Do not move or reposition the bed with
service user or patient on the bed.
WARNING
Cleaning and disinfection MUST be carried out
by a competent person.
The bed must be disconnected from the
power supply when being cleaned or
disinfected.
All functions MUST be tested and approved by
a competent person after cleaning or
disinfection.
WARNING
Troubleshooting MUST be carried out by a
competent person.
Do not attempt to open any electrical part
enclosures.
Do not attempt to repair any electrical parts.
All functions MUST be tested and approved by
a competent person after troubleshooting