Accora FloorBed 2, Инструкция по эксплуатации

Страница: 8 / 19

8
© Accora: 01223 206100 | info@accora.uk.com | www.accora.uk.com
10.
Inspect all wiring for damage and risk of crushing
before plugging in the power supply.
11. Using the handset, raise the mattress platform
approximately 30cm. Tighten four locking screws
under the mattress platform as shown.
12.
If the bed has been supplied with tie wraps / hook
and loop tape (or similar) securing any of the
sections in place, ensure they are removed prior to
operation.
8. Positioning
The handset can be used for positioning the sections
and for adjusting the height of the mattress platform of
the bed by either the patient or the carer.
Always check for obstruction before raising and
lowering. Before using the control, the operating staff
should explain to the patient how the bed can be
positioned. If the medical staff state that the patient’s
medical condition is inappropriate for the patient to
be able to adjust the bed independently, the bed’s
position must be adjusted by the carer.
Please check for any entrapment risks under the
bed before lowering to the lowest position.
WARNING
Bed positioning MUST be carried out by a
competent person.
Check for obstructions around, above and
below the bed frame and position the bed so
that it can operate through the full height
range without any chance of obstruction or
entrapment.
The head end of the bed must be a minimum
of 300mm from the wall and always engage
the brakes when the bed is stopped or left
unattended.
The patient should only operate bed if they
are competent to do so.
2
4
6
7
9
1
3
5
8
Backrest elevating/lowering
Legrest elevating/lowering
Bed elevating/lowering
Floor-level safety button (must be
pressed with button number six)
Reverse Trendelenburg and
Trendelenburg function
1
3
5
8
2
4
6
7
9