3.3 DVD-RW Installation
Loosen the four screws holding the DVD-RW rack in place as shown below and remove
the DVD-RW rack then.
Remove the two screws on the DVD-RW rack and split it as the two part shown as below.
Position the two mounting plates on either side of the DVD-RW then tighten them with
screws. Now place the assembly inside the DVR chassis, align the mounting plates with
the mounting holes on the chassis and screw into place.
Finally, connect the SATA cable and SATA power cable to the back of the DVD-RW.
DVD-RW Installation is now complete.
13
