2) Event Setup2 parameter Setting
3) MOTION AREA CH and 4) MOTION AREA
Whenever ENTER button is pressed, marking within above red circle will changed from
“DIRECTION” mark to “+” and “-” mark. In the “Direction” mark, motion area can be
moved with direction button like LEFT or RIGHT or UP or DOWN button. In the
“+”
mark,
motion area can be enabled by direction button. In the
“-” mark
, motion area
can be disabled by direction button.
Motion channel can be changed by or button from CH1 to CH16
.
30
Motion Area CH selection
Motion Area selection
Sensitivity (5 step):
Very Low, Normal, Very High
Sensor:
N.O or N.C
Input:
CH1 to CH16
Exit this menu.
Output:
Trigger Output Selection
Any output OFF, CH1 to CH4
can be selected.
Buzzer:
On/ Off
The
MOVE
mode which can just
move motion area by LEFT or
RIGHT or UP or DOWN button.
