TIME DATE OSG
It defines that time and date OSG is added or deleted in display
picture.
POPUP
It defines POP UP picture can be displayed as full screen or not, when motion
is detected or alarm is triggered. The channel with motion detection or alarm triggered
will be displayed as full screen during given seconds, about 30 sec.
NOTE: After system configuration, “UPDATE” icon should be clicked in order to
reflect configured data in remote DVR. If it is not requested to reflect configured
data in DVR, just “CLOSE” icon can be clicked.
C) Camera configuration
CAMERA No.
All of 16ch camera ID and PTZ protocol can be adjusted separately.
Before selecting camera ID and PTZ protocol, video channel selection is requested
first. It can be selected by “Up” or “Down” key of keyboard or mouse wheel.
CAMERA ID
The camera ID can be easily modified.
PTZ Protocol
The high end camera(s) with panning, tilting and zooming function would
be connected with some of video inputs. The camera(s) has(have) its own control
protocol needed to control panning, tilting and zooming, according to PTZ camera
manufacturer. In order to control the camera with PTZ function in network viewer
software remotely, PTZ TYPE (PTZ protocol) should be same with PTZ protocol of
remote DVR. About 15 protocol for PTZ camera control can be available now. They
are: Panasonic/ Pelco-D/ Pelco/ PelcoP/ Techwin/ Niko/ DRX502A_DSC230s/
KRE_301_302/ GC_755_NP/ TOA_CC554/ RAS716LS and so on.
D) RECORD
STOP KEY:
DISABLE/ ENABLE. In case of manual recording, manual recording is
started and stopped by the
REC/ STOP
button in the front panel of DVR.
This
REC/
STOP
button
ENABLE
can protect the
“recording stop”
by unauthorized person
intentionally. It can be selected by “Up” or “Down” key of keyboard or mouse wheel.
SELECT CH, Resolution and RECORD
Video channel from CH1 to CH16 which need recording can be selected separately.
The video resolution for each channel can be selected separately from D1 (720x480),
Half D1 (720x240) to CIF (352x240) in NTSC.
After selecting channel in SELECT CH, recording can be selected as “DISABLE” or
“ENABLE in RECORD with video resolution in Resolution.
QUALITY:
VERY LOW, LOW, NORMAL, HIGH, VERY HIGH
56
