7)Remote Setting
A) System configuration
Video Format
Video format is automatically detected after DVR power ON. The
detected video information will be displayed on VIDEO FORMAT. User don’t need to
change video format.
Password
Password can be changed using number button, 0 to 9 of keyboard.
NOTE:
The password of
Factory Default in DVR is “1111”.
Time Format
Time format which include 24 HOURS (military time) or 12 HOURS
(AM/PM) can be changed.
Date Format
Date format which include MM-DD-YY/ DD-MM-YY/ MM-DD-YY can be
changed according to country.
Version
It shows DVR software version. Whenever upgrading software, upgraded
version number will be displayed.
NOTE: After system configuration, “UPDATE” icon should be clicked in order to
reflect configured data in remote DVR. If it is not requested to reflect configured
data in DVR, just “CLOSE” icon can be clicked.
B) Display configuration
SELECT CH
All of 16ch video quality including brightness, contrast can be adjusted
separately. Before adjusting brightness, contrast, video channel selection is needed
first.
Bright
The brightness can be controlled using slide bar from 1to 99%. Default setting
value is 85%.
Contrast
The contrast can be controlled using slide bar from 1to 99%. Default setting
value is 80%.
Default
It return the value of brightness and contrast to factory initial value.
SEQ. DWEL TIME
It defines time interval of channel switching in live video or POP-UP
mode related to motion detection and alarm triggering. 1 to 60 seconds time interval
can be configured for sequence dwell time.
SPOT TIME
It defines time interval of channel switching. 1 to 60 seconds time interval
can be configured for sequence dwell time.
55
