4) CAM NO OSD:
ON/ OFF
When it is set as OFF, characters which indicates camera number will be disappeared on
monitor.
CAM NO OSD
ON/ OFF can be changed using LEFT
or RIGHT
button.
5) VIDEO LOSS OSD:
ON/ OFF
VIDEO LOSS OSD
ON/ OFF can be changed using LEFT
or RIGHT
button. When it is set
as OFF, black pictures will be displayed when video loss. When it is set as ON, “VIDEO
LOSS” character with white color will be displayed in blue screen.
6) POP-UP DISPLAY:
ON/ OFF
POP-UP DISPLAY ON/ OFF can be changed using LEFT
or RIGHT
button. When it is
set as OFF, pop-up image of camera(s) which motion detection or alarm triggering is
occurred will not be displayed. When it is set as ON, the channel (s) which motion is
(are) detected or external alarm is (are) triggered will be POP-UP in monitor during
maximum 30 seconds. In case that motion detection or alarm event is occurred more
than two channels, POP-UP picture will be appeared in monitor turn by turn during 3
seconds for each channels. Total period of POP-UP display is 30 seconds.
7) ADJUST CH:
CH1, CH2, CH3, CH4, … , CH16
The camera channel needed to adjust brightness, contrast, Hue & Saturation can be
selected.
8) PRIVATE
The video channel which don’t want to display on monitor can be selected by LEFT
or
RIGHT
button. Selected channel isn’t displayed on monitor while live or playback
display. The private channel is displayed black screen.
9) CH QUALITY SET
Quality control including brightness, contrast , hue and saturation can be adjusted.
BRIGHTNESS/ CONTRAST:
1 to 99 %
BRIGHTNESS can be changed using LEFT
or RIGHT
button. CONTRAST can be
changed using UP
or DOWN
button.
HUE/ SATURATION:
1 to 99 %
HUE can be changed using LEFT
or RIGHT
button. SATURATION can be changed using
UP
or DOWN
button.
NOTE: Minimum value is 1 (very dark), maximum value is 99 (very bright).
In order to move from BRIGHTNESS/ CONTRAST to HUE/ SATURATION adjust or
vice versa,
ENTER
button can be pressed. In the full screen, picture quality adjust
channel can be moved easily by pressing
or
button.
10) QUALITY RESET
Quality control including brightness, contrast, hue and saturation can be reset by
factory initial value by this QUALITY RESET.
26
