Abus SECVEST, Руководство по установке

Страница: 23 / 171

Mounting/Installation
23
Fixing the mounting plate to the wall
Positioning the wireless alarm system
(alarm panel)
Note
The alarm panel should be positioned in a safe
place out of sight of possible intruders and easily
accessible to the operator.
The alarm panel should be mounted on a flat
surface in order to ensure that the back of the
device cannot be tampered with when the alarm
panel is mounted.
The alarm panel should be mounted at a
comfortable height (between 1.5 and 2 m).
Note
If small children are present, the alarm panel
should be mounted out of their reach.
Note
Position the alarm panel so that signal tones can be
heard even outside of the area being monitored.
The alarm panel should be positioned within a
monitored zone so that an unauthorised person
would have to enter a monitored area first before
gaining access to the panel when it is armed.
The alarm panel should be mounted near a socket
or power supply.
If a telephone dialler is used, the alarm panel must
be connected to a telephone connection.
The alarm panel should be mounted at least
1 metre away from metal objects (e.g. mirrors
or radiators).
Fixing the mounting plate
Caution
The alarm panel is supplied power via an
integrated power supply unit.
The power supply unitis connected to the
building's 230 V AC grid via a separately secured
line.
Connection to the building's grid is subject to the
country's specific regulations.
Ensure that the supply line is disconnected from
the power and secured against being reconnected.
Caution
Ensure that there are no lines in the wall of the
selected mounting location.
1. Drill the mounting holes into the wall using the drilling
template in the quick start guide.
2. Unscrew the screw on the bottom of the housing.
3. Carefully open the housing.
4. Carefully pull the ribbon cable connector out of the
terminal block on the PCB.
5. Separate the top part of the housing from the
bottom part.