Abocom WR5560, Руководство пользователя

Страница: 7 / 67

4
Chapter 2: About
Operation Modes
This device provides operational applications with Router, AP and Converter modes, which are
mutually exclusive.
This device is shipped with configuration that is functional right out of the box. If you want to change
the settings in order to perform more advanced configuration or even change the mode of operation,
you can MANUALLY switch to the mode you desired by the manufacturer as described in the
following sections.
Operation Modes
You have to MANUALLY switch the bar into the mode you preferred, Router, AP or Converter modes,
then the device will reboot automatically into the mode you have selected.
Router Mode
In this mode, the device is supposed to connect to internet via ADSL/Cable Modem. The NAT is
enabled and PCs in LAN ports share the same IP address to ISP(Internet Service Provider) through
WAN port. The connection type can be setup in PPPoE, DHCP client, PPTP client, L2TP client or
static IP.
The wireless connection will be set up from a point-to-point LAN into a point-to-multipoint WAN.
This device connects all the stations (PC or notebook with wireless function) to a wireless network. All
stations can have the Internet access if only the device has the Internet connection.