Chapter 3: Configuration
30
MAC Address
MAC Address
: Enter the Wireless BSSID (MAC) 12 characters of the
wireless AP that you want to connect with. To check your wireless router’s
MAC address, please go to
Status
>
Wireless Configuration
to find your
BSSID
(Wireless MAC address.)
Data Rate
Select the data rate form the pull-down list.
Comment
Enter a description for the device.
Apply Changes
After completing the settings on this page, click
Apply changes
button to
save the settings.
Reset
Click
Reset
to restore to default values.
Set Security
Enable the WDS function and then click
Set Security
button to set up the
WDS security.
Encryption:
Select the encryption type
None, WEP 64 bits, WEP 128 bits,
and
WPA2(AES)
from the pull-down menu.
WEP Key Format:
For
WEP 64 bits
and
WEP 128 bits
encryption type, the
selection of
WEP Key Format
are
Hex
and
ASCII
.
WEP Key
: If select Hex if you are using hexadecimal numbers (0-9, or A-F).
Select ASCII if you are using ASCII characters (case-sensitive).
z
Hexadecimal (WEP 64 bits):
10 Hex characters (0~9, a~f).
z
Hexadecimal (WEP 128 bits):
26 Hex characters (0~9, a~f).
z
ASCII (WEP 64 bits):
5 ASCII characters (case-sensitive).
z
ASCII (WEP 128 bits):
13 ASCII characters (case-sensitive).
Pre-Shared Key Format
: The
Pre-shared Key Format
will be enabled
when
WPA (TKIP)
and
WPA2 (AES)
encryption be selected. There are two
formats for choice to set the Pre-shared key,
Passphrase
and
Hex (64
characters)
. If
Hex
is selected, users will have to enter a 64 characters string.
For easier configuration, the
Passphrase
(at least 8 characters) format is
recommended.
Pre-Shared Key:
Pre-Shared-Key serves as a password. Users may key in 8
to 63 characters string to set the passwords or leave it blank, in which the
802.1x Authentication will be activated. Make sure the same password is
Содержание WR5560
Страница 1: ...802 11 b g n Giga Router User s Manual...
Страница 14: ...Chapter 3 Configuration 11 Status...
