background image

  Chapter 4:  

PC Configuration 

 

57

 

Use the "Deactivate" and "Activate" buttons, if available. 

 

OR, restart your system. 

 

Other Unix Systems 

To access the Internet via the Wireless Router: 

 

Ensure the "Gateway" field for your network card is set to the IP Address of the Wireless Router. 

 

Ensure your DNS (Name Server) settings are correct. 

 

Wireless Station Configuration 

 

This section applies to all wireless stations (client end) wishing to use the Wireless Router as an 
access point, regardless of the operating system that is used on the client. 

 

To use the Wireless Router, each wireless station must have compatible settings, as following: 

Mode 

 

The mode must be set to 

Infrastructure

SSID (ESSID) 

(Extended Service Set 
Identifier)

 

The network name must match the value used on the Wireless Router. 

Note! The SSID

(service set identifier)

 is case- sensitive.

 

Disable 

If there is no security is enabled on the Wireless Router, the security of 
each station should be disabled as well. And, you can connect the 
Wireless Router without security, but it is NOT recommended. 

WEP  
Open System/ Shared 
Key/ Auto 

By default, WEP on the Wireless Router is disabled. 

Shared Key only supports WEP as encryption method. 

AUTO(Open/Shared) means AP can accept STA connect to it using 
OPEN-WEP or SHARED-WEP. 

 

If WEP remains disabled on the Wireless Router, all stations must 
have WEP disabled. 

 

If WEP is enabled on the Wireless Router, each station must use the 
same settings as the Wireless Router. 

Personal (Pre-Shared 
Key) 
 
WPA 
WPA2 
WPA2-Mixed 
 

WPA-PSK(TKIP/AES)/ WPA2-PSK(TKIP/AES): If one of these 
securities is enabled on the Wireless Router. To make a connection, 
each station must use the same algorithms and pass phrase as the 
Wireless Router. 

Pre-Shared Key Format: 

 There are two formats for choice to set the 

Pre-shared key, 

Passphrase

 and 

Hex (64 characters)

. If 

Hex

 is 

selected, users will have to enter 64 characters string at a time. For 
easier configuration, the 

Passphrase 

(at least 8 characters) format is 

recommended. 

Pre-Shared Key : 

Pre-Shared Key serves as a password. Users may key 

in 8 to 63 characters string if you selected passphrase. Pre-shared key 
format to set the passwords or leave it blank, in which the 802.1x 
Authentication will be activated.  Make sure the same password is used 

Содержание WR5560




































































Отзывы: