Abocom WR5560, Руководство пользователя

Страница: 21 / 67

Chapter 3: Configuration
18
first, therefore, the Mobile networks function can be used.
Auto APN: APN(Access Point Name.) If this function be selected, the
system will auto detect the mobile network setting via the USB that
provide by the Internet service provider(ISP). To use the default
settings is recommend.
Service Name : Keep the default setting or enter the service name that
ISP provided.
Dial Number : Keep the default setting or enter the dial number that
ISP provided.
Authentication : Check the box to enable to authentication function.
z
User Name : Enter the user name that provide by your ISP.
z
Password : Enter the password that provide by your ISP.
Pin code : Keep the default setting or enter the SIM card Pin code that
ISP provided.
Connection Type : Select the connection type Continuous , Connect
on Demand from the pull-down menu.
Idle Time : It represents that the device will idle after the minutes you
set. The time must be set between 1~1000 minutes. Default value of
idle time is 5 minutes. This function will be available when the
Connection Type is selected to Connect on Demand .
MTU Size : MTU(Maximum Transmission Unit, namely the maximum
packet size) for your application. Reducing the packet size can help
connecting to certain web sites or speeding up packet transfer rate. If
the incorrect selection is entered, you may not be able to open certain
web sites.
Enable uPNP… Check to enable the listed functions.
Apply
After completing the settings on this page, click Apply button to save
the settings.
Cancel Click Cancel to restore to default values.