![background image](http://html1.mh-extra.com/html/abm/superbike/superbike_installation-and-safety-information_3443902003.webp)
Installation manual Superbike
™
for Kawasaki ZX-10 R model 2016-
• Revision: 00 • 30/01/2020 •
© ABM Fahrzeugtechnik GmbH
Page 3 of 19
1
Preparation
Please read the entire safety information and installation manual carefully.
A motorcycle not securely positioned can fall over during the following work. Therefore, make sure
that the motorbike is positioned on solid, flat ground and is secured against falling over and rolling
away.
Keep children and pets away from the work area.
Protect removed parts from damage.
Never remove the upper triple clamp without first removing load from the front wheel as this could
damage the lower triple clamp.
Please note when disassembling individual parts which screws are used to fasten them. Keep these
parts and screws and unless specified otherwise, reuse when assembling.
2
Content and recommended accessories:
Special tool: Torque wrench
Shorten fairing: yes
Accelerator cables: original
Steering stop yes
Clutch cable / line: new, enclosed
Shortening of
windshield:
no
Brake line: new, enclosed
Riser/handlebar BK3/0439
Choke cable: not available
Handlebar extension yes
Fairing pad yes