![background image](http://html1.mh-extra.com/html/abm/superbike/superbike_installation-and-safety-information_3443902005.webp)
Installation manual Superbike
™
for Kawasaki ZX-10 R model 2016-
• Revision: 00 • 30/01/2020 •
© ABM Fahrzeugtechnik GmbH
Page 5 of 19
Tip: Remove load from the front wheel and
cover the fairing.
Unclip the clutch cable at the lever.
Pull off the top yoke and place it onto the
side fairing on the left.
Drain the brake fluid of the brake unit
according to the manufacturer's
specifications.
Disconnect the brake line from the brake
pump.
Remove the switch units, armatures and the
brake pump on both sides.
Remove both original handlebars.
Tip:
Release the reservoir bracket, open the
hollow screw and let the fluid drip out of
the brake pump and brake line up to the
manifold at the radiator.
Close the fittings and the hand pump with
paper towels (see image).
Loosen the brake line and manifold above the
radiator
and remove the complete line.