![background image](http://html1.mh-extra.com/html/abm/superbike/superbike_installation-and-safety-information_3443902017.webp)
Installation manual Superbike
™
for Kawasaki ZX-10 R model 2016-
• Revision: 00 • 30/01/2020 •
© ABM Fahrzeugtechnik GmbH
Page 17 of 19
Make sure that all operating elements present on the handlebar are adequately
positioned, even in maximum steering angle. The hand brake cylinder and the
storage tank must be located in an adequate operating position.
Pay attention to the freedom of movement of the handlebar, its mounted parts
and adequate steering angle to each side. The handlebar must be able to be
moved easily from left to right. Check the free play of the accelerator cables: In
maximum steering angle to both sides and with the engine running, the motor
speed must not change.
After completing the work, the firm fit, function and tightness of all components
and screws must be checked. Make sure that there is sufficient brake fluid in the
reservoir. Also check the front wheel's freewheel and the functionality of the
brake system. Further, the function of the clutch, the throttle grip, the electric
system and the anti-theft devices must be checked.
Afterwards, a test drive must be done! After completion of the test drive, all
screw connections must be re-checked for firm fit, tightness and all movable
parts for adequate freedom of movement. Re-test the front wheel's freewheel
and check the brake system for overheating. Check the brake fluid level in the
reservoir for significant changes.
After ca. 100km, the firm fit of all screw connections of the handlebar must be
re-checked against the specified tension values.