![background image](http://html1.mh-extra.com/html/abm/superbike/superbike_installation-and-safety-information_3443902007.webp)
Installation manual Superbike
™
for Kawasaki ZX-10 R model 2016-
• Revision: 00 • 30/01/2020 •
© ABM Fahrzeugtechnik GmbH
Page 7 of 19
Loosen the screws of the ignition lock using a
special tool or drill out.
Tip: Centre-punch and pre-drill using a drill
(3mm). Then drill out the screw head (8mm).
All the original parts for attaching the ignition
lock are no longer needed.
Attach the clamps with screws (M10) and
safety washers onto the top yoke.
Use thread-locking fluid (medium strength).
Tightening torque 28 Nm
Caution: The wide side of the clamps must
face forward.
Caution: The screws must not protrude into
the clamp area of the handlebar.
For attaching the ignition lock drill out both
holes to Ø 11 mm.