User manual Version 1.5
SW5001 Wireless Serial Server
Copyright © 2010 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan
- 22 -
5.5.4. UDP Mode
SW5001 can be configured in a
UDP mode
to establish connection using
Unicast
or
Multicast
data from
the serial device to one or multiple host computers. Vice versa is also true. For example, the original
RS-422/ RS485
bus can be transferred and extended connected distance by SW5001s.
The destination IP is assigned by single IP or group IPs, The configuration is limited by the Local Listening
Port. For example, on SW5001 listening port is 4660 which receive data sending from the host computers.
SW5001 can support up to
4-group
IPs for UDP connection, if users needed.
Fig 30. UDP protocol in Link mode
Note: In this phase, UDP mode does not support Virtual COM mode.
5.5.5. Serial Settings
This filed can be configured with serial parameters for SW5001. Here User can configure Serial parameters,
include
UART Mode
,
baud rate
,
parity
,
data bit
and
type of flow control.
Configure UART Mode:
RS-232 or RS-485 or RS-422
Baud
rate:
1200/2400/4800/9600/19200/38400/57600/115200
Parity:
None or Odd or Even or Mark or Space
Data
bits:
7 or 8
Stop
bits:
1 or 2
Flow
control:
None or Xon/Xoff or Hardware (RTS/CTS)
Fig 31-1. Serial Communication Settings from Web Page
Note: The isolation, SW5001-WgN1Sis (TB), only support max 230Kbps baud rate.
