User manual Version 1.5
SW5001 Wireless Serial Server
Copyright © 2010 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan
- 28 -
Then the following main menu shall appear
Fig 39. Overview information by telnet
If the SW5001 does not receive any command within
1 minute
, Telnet will be terminated
automatically.
The changes of networking parameters will take effect only after the SW5001 is restarted.
6.1. General Information
Operation: [Main]
Æ
[1 Overview]
Select “
1
” from “
Input choice (0~6) and enter:
” to enter “
overview page
.
This system overview window gives the general information on
Ethernet & WLAN IP
,
MAC address,
SNMP information, kernel and AP version, and the connection status
of the SW5001 (
Fig. 39
).
The following overview information shall appear.
Device Information:
Model Name
: SW5001’s Model
Device Name
: [Allows for changes in SNMP settings]
Kernel Version
: [Read Only, Generated by system]
AP Version
: [Read Only, Generated by system]
Ethernet Information:
MAC:
[Read Only]
IP:
[Allows for changes in Network Page]
WLAN Information:
MAC:
[Read Only]
