User manual Version 1.5
SW5001 Wireless Serial Server
Copyright © 2010 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan
- 10 -
Configure
SW5001
to
Tunneling
Mode
Using one of three configuration methods (Telnet, Web, or Console)
, user can configure SW5001 to TCP
Server mode with a desired IP address and port, and with other SW5001 is configured as TCP Clients
mode with Server IP and port as destination IP and port respectively.
Note: TCP client has to assign the destination IP and the destination port corresponding to TCP
server’s IP and listening port (example: TCP 4660 port).
Fig 9. TCP Tunneling Mode
UDP
In UDP mode, User may exchange Multicast data from one SW5001 with multiple SW5001s, Vice versa is
also true.
Fig 10. UDP Link in Tunneling mode
Configure
SW5001
in
UDP
Mode
Use one of the three configuration methods (Telnet, Web, and console). user can configure SW5001 to
UDP mode. In UDP mode, SW5001 can be configured to communicate to more than one node
(Multicasting). Note that the
Multicast
IP address is limited by the Class of IP address and subnet mask. As
an example, for a network of Class C of subnet 192.168.1.X and a subnet mask of 255.255.255.0, the
maximum Multicast IP address to be configured is
four
destinations IP’s.
Fig 11. Multi-UDP Link in Tunneling Mode
