User manual Version 1.5
SW5001 Wireless Serial Server
Copyright © 2010 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan
- 6 -
Note: ARP commands can only be used to set a static IP address of SW5001
-
arp –a
command show the current mapping IP and MAC addresses.
-
arp –s
“IP address” “MAC address” map the IP address to specify MAC address.
3.2.2. Configure IP by web interface
Use common Web browser, ex. Microsoft Internet Explorer or Mozilla Firefox, to configure the
network parameters of SW5001.
Open web browser, type in the
IP address
(default IP: 10.0.50.100) of SW5001 to be configured.
Default user name is
admin
and default password is
null
(leave it blank).
Configure IP settings from web
Network links page
then click “
Save Configuration
” to save
settings.
Click on ”
Restart
” button to make the change effective.
Please refer to contents of
Web Configuration section
for more details.
.
3.2.3. Configure IP by Telnet utility
Use common Telnet utility, ex. Microsoft Hyper-terminal, to configure the network parameters of SW5001.
Run command
telnet “IP address
” to telnet to SW5001 .
Default IP address is 10.0.50.100
and
default password is
null
(leave it blank).
Configure IP settings from
network settings
menu, and
restart
system after saved settings.
Please refer to
Telnet Configuration
section for more details.
3.2.4. Auto IP with DHCP
DHCP
server will automatically supply an
IP address
gateway address
, and
subnet mask
to SW5001. By
default, the DHCP client function on SW5001 is disabled, user can activate the DHCP functions by the
following steps
Execute
SerialManager Utility
Click on the
IP address
(of SW5001)
Click “
Config
” to pop-up the static IP Dialog Window
Check on ”
Auto IP
”
Click “
Config Now
” (The SW5001 will restart and obtain the IP from the DHCP server
automatically)
3.3. TCP/IP Port Number
Default Port numbers of SW5001 is
4660
(1
st
port) and it is associated with the serial port
COM1
. After the
application program connected to the TCP port 4660 on the SW5001, data of user’s application program
are transmitted transparently to SW5001 and vice versa.
