| Important information –
User information
6
Electrical installation and testing must be carried out with reference to local rules by a qualified specialist
electrical contractor, who, on the basis of their specialist training and experience, as well as their knowledge of
the relevant standards, is able to assess and carry out the working steps described in this manual and recognise
potential hazards.
WARNING!
Notification or approval requirement for charging stations
Please note that electrical grid operators, energy suppliers or national regulations may require notification of or
approval for the installation or operation of a charging station.
A Duty to Notify applies in Germany according to §19 NAV.
In case of installation faults, or malfunctions that can be traced back to faulty installation, always contact the
contractor who carried out the installation first.
The product must not be covered with stickers or other objects or materials.
No liquids or receptacles containing liquids must be placed on the product.
Please note that the POLEMHx mounting pole must never be installed directly on asphalt! To ensure safe and
proper mechanical installation, the optionally available EMH9999 concrete foundation or a functionally equivalent
alternative must always be provided.
Do not under any circumstances make alterations to the product. Any disregard of this instruction represents a
safety risk, fundamentally breaches the guarantee provisions and may void the warranty with immediate effect.
Malfunctions affecting the safety of persons, connected electric devices or the device itself must be resolved by a
qualified specialist electrical contractor.
Should one of the following malfunctions occur, please contact the specialist electrical contractor who has carried
out the installation of your wallbox and accessories:
y
The product housing has been damaged mechanically, or the housing cover has been removed or can no longer
be closed.
y
Sufficient protection against splashing water and/or foreign objects is no longer provided.
y
The product does not function properly or has been otherwise damaged.
WARNING!
Observation of further safety instructions
Please always observe all further safety instructions in the manuals for the optionally available wallbox and oth-
er accessories for the POLEMHx.
User information
Ensure that rated voltage and rated current of the supply cable at the installation location comply with the
parameters of your local electricity grid and that the rated output of the wallbox installed on the POLEMHx is not
exceeded during operation.
Local safety regulations regarding the operation of electrical devices for the country in which you operate the
wallbox installed on the POLEMHx always apply.
Never install or operate the POLEMHx in confined spaces. In particular, it must be ensured that vehicles can be
parked at a suitable distance from the POLEMHx for charging and can be connected to the charging cable without
tension.
Make sure that the POLEMHx is always closed and locked when in use. All authorised users must be aware of the
'unlock' position of the key.
You must under no circumstances make any changes to the housing or the internal wiring of the POLEMHx: Any
disregard of this instruction fundamentally breaches the guarantee provisions and voids the warranty with imme-
diate effect.