Dimensional drawings and dimensions –
EMH9999 |
11
EMH9999
ABL offers the EMH9999 foundation as an optional accessory for installing the POLEMHx: The foundation block is
made from grade C30/37 concrete and complies with exposure classes XC4 and XF1 for outdoor use. Integrated
threaded anchors ensure stable and secure installation of the POLEMHx, and the supply line and data cables can be
fed into the mounting pole from below via recessed pipelines.
NOTE
Using a custom foundation
These instructions describe how to install the POLEMHx on the EMH9999 concrete foundation. In principle, it is
possible to make a custom foundation, but this must be based on the specifications of the EMH9999.
If you wish to install and operate the POLEMHx on a self-made foundation, a stable base and fault-free oper-
ation outdoors cannot be guaranteed.
Concrete foundation for installing a POLEMH1/2/3 mounting pole, side, top and isometric view
(all dimensions in mm)
Detailed view of the top side
C
B
A
A
These four threaded anchors are used to mount the POLEMH1 or POLEMH2
mounting pole using the washers and M12 screws supplied.
B
These four threaded anchors are used to mount the POLEMH3 mounting poles
using the washers and M12 screws supplied.
C
The large opening on the right is used to feed the supply cable through the
foundation into the POLEMHx, while the small opening on the left is intended
for data cables.
430
190
0
56
430
190
330
210
50
95
24,3
38,8
M12
45°
650
120
