Appendix
29
• Ensure that the selected installation site is suitable for mounting the charging sta-
tion with respect to substrate, power supply/cabling path, distance to the vehicle
and environmental conditions.
• Strictly observe all instructions regarding mounting position and height. You will
find the necessary information in section “Prerequisites for the mounting site and
• Check the measurements on the drilling template BEFORE you mark and drill the
holes using the template.
WARNING!
Consider leaving the final installation to a qualified and authorized
electrical contractor: Should malfunctions occur that can be shown to
have resulted from improper mounting and installation, all guarantee
and warranty provisions will become void. Proof of proper installation
(e.g. by submitting the relevant invoices) must be furnished on request
before guarantee and warranty provisions come into effect.
Intellectual Property & Copyright
Copyright © 2015
Version 1.0, current revision 2015/07/16
All rights reserved.
Any information in this manual may be changed without prior notice and does not rep-
resent any obligation on the part of the manufacturer.
Illustrations in this manual may show designs different from the delivered product and
do not represent any obligation on the part of the manufacturer.
The manufacturer does not take responsibility for any loss and/or damages that occur
because of the data or possible misinformation contained in these instructions.
This manual, in its entirety or in parts, must not be reproduced, stored electronically
or otherwise transmitted electronically, electrically, mechanically, optically, chemically,
by photocopy or as an audio recording without the written permission of the manu-
facturer.
