Resolving errors
19
Resolving errors
Your
eMH1
charging station is engineered for maximum operational safety and the
highest possible charging reliability. Should a malfunction occur in practice, this is
shown by the indicator LEDs on the upper part of the
housing as an error code.
The following chapter describes how you recognize oper-
ating states as well as error codes and which measures
you must take to resolve them.
Operating states
The two indicator LEDs on the left above the front cover shield show the current op-
erating status of the
eMH1
charging station. To indicate certain operating states, the
LEDs may...
• ...be illuminated (continuous ON)
• ...flash
• ... be extinguished (continuous OFF).
During normal operation, the following operating states are shown:
Description
flashes
every 5
seconds
OFF
The charging station is ready for operation, the vehicle may
be connected for charging at any time
illumi-
nated
OFF
The vehicle is connected and has been detected. Next, the
charging procedure will start automatically.
OFF
illumi-
nated
The vehicle is currently being charged
OFF
flashes
every 5
seconds
Charging is complete, the charging station can be unplugged
from the vehicle
