Introduction
6
A common characteristic of all
eMH1
models is the particularly space-saving hous-
ing made from durable plastic, which effectively protects the internal electric circuits
against environmental influences and unauthorized access. In general, the
EVSE 563
should be installed and taken into operation by a qualified electrical contractor. Your
local distributor will be happy to arrange specialist installation for you at your desired
location.
Identifying your product variant
The
eMH1
series comprises several model variants, which are mechanically and/or
electrically adapted to different usage profiles. For identification, a product compliance
plate is located at the back of the lockable housing cover shield near the hinge. Please
open the cover shield before taking the device into operation and check the compli-
ance plate to ensure that the model variant you have installed is the one described in
this manual.
(Design may vary)
For identification, the model
code (
EVSE 563
) as well as
the power supply ratings
(voltage, frequency, current)
indicated below it are espe-
cially relevant.
The following charging stations are described in this manual:
Model
Power supply
Model Variant
EVSE 563
230/400 V 50 Hz 32 A
Fixed charging cable with type 2 connector,
charging output 22 kW
WARNING!
The information and technical specifications contained in this manual
relate exclusively to the
eMH1 EVSE 563
model variant mentioned in
these instructions and must UNDER NO CIRCUMSTANCES be trans-
ferred to other
eMH1
models.
099999
14-12-23
EVSE563
230/400V 50Hz 32A
IP54
IEC 61851-1
IEC 61439-7 ACSEV
