DE
-
8
6 Moving the robot
RTM ABIx EasyTeach
6 Moving the robot
7 Creating a welding program
1
Set the speed.
7.1 Setting the speed on page DE
2
Activate programming mode.
7.2 Activating/deactivating programming mode on page DE
3
Add movements.
7.3 Adding movement on page DE
7.4 Adding circle movement on page DE
4
If welding should take place during a movement in the program, activate welding before the movement
and deactivate after the movement.
7.5 Switching the welding process on/off on page DE
5
Deactivate programming mode.
7.2 Activating/deactivating programming mode on page DE
7.1 Setting the speed
1
Select menu <Program> → <URCaps> → <easyTeach>.
All movements created with easyTeach are then set in set speeds.
► To move the robot from position to position, press and hold down the
<Robot movement release> button on the multifunction flange for the
duration of the movement.
Fig. 7
Setting the speed
Welding speed
Speed used when the welding process is active.
Free space speed
Speed used when the welding process is not active.
Содержание RTM ABIx EasyTeach
Страница 26: ...DE 14 Notes RTM ABIx EasyTeach Notes ...
Страница 27: ...RTM ABIx EasyTeach Notes DE 15 Notes ...
