Abicor Binzel RTM ABIx EasyTeach, Оригинальная инструкция по эксплуатации

Страница: 15 / 28

RTM ABIx EasyTeach 1 Identification
DE - 3
1 Identification
These operating instructions describe only the multifunction flange <RTM ABIx EasyTeach> and the
corresponding software extension for the robot control system <URCap>.
These operating instructions apply only in connection with the instruction leaflet for the installation and use
of the robot control system <URCap>.
1.1 Marking
This product fulfills the requirements that apply to the market to which it has been introduced. A
corresponding marking has been affixed to the product, if required.
1.2 Signs and symbols used
The following signs and symbols are used in the operating instructions:
1.3 Classification of the warnings
The warnings used in the operating instructions are divided into four different levels and shown prior to
potentially dangerous work steps. The following signal words are used depending on the type of hazard:
2 Scope of delivery
— 1 × multifunction flange incl. attachment materials
— 1 × connecting cable
— 1 × operating instructions
General instructions.
Action(s) to be carried out in succession.
Lists.
Cross-reference symbol refers to detailed, supplementary or further information.
Caption, item description.
1
A
DANGER
Describes an imminent threatening danger. If not avoided, it may cause severe injuries or death.
WARNING
Describes a potentially dangerous situation. If not avoided, this may result in death or serious injuries.
CAUTION
Describes a potentially harmful situation. If not avoided, this may result in slight or minor injuries.
NOTICE
Describes the risk of impairing work results or material damage and indicates irreparable damage to the
device or equipment.