Abicor Binzel iRob P400, Руководство по эксплуатации

Страница: 39 / 144

iROB 4 Scope of delivery
EN - 11
4 Scope of delivery
For an operational robot welding system, the following components are required:
Order the equipment parts and wear parts separately. Order data and ID numbers for the equipment parts
and wear parts can be found in the current
ABICOR BINZEL spare parts and wear parts lists.
The contact for consulting and ordering can be found in the Internet at www.binzel-abicor.com .
4.1 Transport
The scope of delivery is carefully checked and packaged, however damage may occur during shipping.
4.2 Storage
For ambient conditions for storage in a closed environment, see:

Tab. 3 Ambient conditions for transport and storage on page EN-8
• iROB robot welding power source • Operating instructions
• Power cable (open) robot welding power source iROB - mains supply
Tab. 6 Scope of delivery
• Cooling unit iCOOL
(for liquid-cooled version only)
• Remote control iCONTROL
• Mounting platform • Plug for power cable (open) robot welding power source iROB - mains
supply
Tab. 7 Options
• Analog robot interface RI1000, digital robot interface RI2000 or bus interface RI3000 with a BUS module
• Connecting cable: Robot interface
(Power source) - Robot control
• Intermediate cable assembly
• Shielding gas welding torch including cable
assembly and torch mount
• Remote control iCONTROL
• iFEED wire feeder
Tab. 8 Robot welding system
Checking procedure
on receipt of goods Make sure that the shipment is complete by referring to the delivery note!
Check the delivery for damage (visual inspection)!
In case of complaints If the delivery has been damaged during transport, contact the last carrier immediately! Keep the
packaging for possible checks by the carrier.
Packaging for return
shipment Use the original packaging and the original packaging material. If you have questions concerning the
packaging and safety during shipment, please consult your supplier, carrier or transporter.
Tab. 9 Transport