Abicor Binzel iRob P400, Руководство по эксплуатации

Страница: 33 / 144

iROB 2 Safety
EN - 5
2.3 Personal protective equipment (PPE)
• To avoid dangers for the user, wearing personal protective equipment (PPE) is recommended in these
instructions. It consists of protective clothing, safety goggles, class P3 respiratory mask, protective gloves
and safety shoes.
2.4 Warnings
In these operating instructions, potentially dangerous work steps are preceded by the following warnings.
Arranged in descending order of danger, they mean:
2.5 Product safety
• The product has been developed and manufactured in accordance with state-of-the-art methods and the
recognized safety standards and guidelines. These operating instructions warn you against
unavoidable residual hazards for user, third parties, devices or other material property. Disregarding
these warnings may result in risks to the life and health of personnel, environmental damage or material
damage.
• The product may only be operated in unchanged and technically perfect condition, within the limits
described in these instructions.
• Always observe the limit values specified in the technical data. Overloading leads to destructions.
• Safety devices on the device may never be dismounted, bridged or bypassed in any other way.
• During welding work outdoors, use suitable protection against the effects of weather.
• Check the electrical device for any damage and for proper functioning in accordance with its
designated use.
• Never expose the electrical device to rain and avoid a moist or wet environment.
• Protect yourself from electrical accidents by using insulating mats and wearing dry clothing.
• Never use the electrical device in areas subject to fire or explosion hazards.
• Arc welding may cause damage to eyes, skin and hearing! When working with the device, always
wear the prescribed protective equipment.
• Any metal vapours, especially lead, cadmium, copper and beryllium are harmful to health! Ensure
sufficient ventilation or extraction. Always ensure compliance with the legal limit values.
• Rinse work-pieces that have been degreased with chlorinated solvents with clear water. Otherwise there
is a risk of phosgene gas formation. For the same reason, no degreasing baths containing chlorine must
be placed in the vicinity of the welding area.
• Adhere to the general fire protection regulations and remove flammable materials from the surroundings
of the welding work area, prior to starting work. Keep appropriate fire extinguishing equipment ready
at the workplace.
DANGER
Describes an imminent threatening danger. If this danger is not avoided, it will result in fatal or extremely
critical injuries.
WARNING
Describes a potentially dangerous situation. If not avoided, it can result in serious injury.
CAUTION
Describes a potentially harmful situation. If not avoided, it may result in slight or minor injuries.
NOTICE
Describes the risk of impairing work results or the risk that the work may result in material damage to the
equipment.