Abicor Binzel ABIDRIVE CW, Руководство по эксплуатации

Страница: 26 / 68

EN - 10
5 Putting into operation TIG cold wire feeder
Carry out the following activities:
1
Connect coolant supply
(1)
and coolant return
(2)
to
ABIDRIVE CW (3)
.
2
Connect coolant supply
(4)
and coolant return
(5)
to coolant recirculator
(6)
.
This completes the connection of the coolant.
5.5 Connecting the control lead

Fig. 4 Overview of connections and operating elements on page EN-9
Carry out the following activities:
1
Connect the control lead (torch side) to connection X1.
2
Connect the control line (intermediate cable assembly) to plug X3
(5)
.
This completes the connection of the control lines.
5.6 Mains connection

Fig. 4 Overview of connections and operating elements on page EN-9
1
Insert plug socket
(3)
into connection X2
(4)
.
2 Plug in mains plug (16) .
The
ABIDRIVE CW
is ready for operation.
1 Cable assembly coolant supply
2
Cable assembly coolant return
3
ABIDRIVE CW
4
Intermediate cable assembly coolant supply
5 Intermediate cable assembly coolant return
6
Coolant recirculator
7 Cable assembly
Fig. 5
Connecting the coolant
1 2
3
6 5
7 4
DANGER
Dangerous voltage
Electric shock caused by incorrectly installed and damaged cables. For the complete duration of work:
• Check all live cables and connections for proper installation.
• Replace defective, deformed or worn parts.
NOTICE
• For the mains voltage and the fuse protection, please refer to the technical data or the nameplate.

2.6 Nameplate on page EN-5

2.6 Nameplate on page EN-5