TIG cold wire feeder
5 Putting into operation
EN - 9
5.2 Overview of connections and operating elements
5.3 Connecting the shielding gas
Fig. 4 Overview of connections and operating elements on page EN-9
Carry out the following activities:
1
Connect shielding gas hose to gas connection
.
2
Connect the shielding gas hose to the shielding gas cylinder.
This completes the connection of the shielding gas supply.
5.4 Connecting the coolant
1
Power supply
2
Power connection X4 Intermediate cable assembly
3
Plug socket (to X2)
4
Power supply connection X2
5
Control lead plug X3 Intermediate cable assembly
6
Wire feeder dial
7
Timer / Feed dial
8
Program selection switch
9
Display
10
Timer / Pause dial
11
Central plug
12
Socket of control lead X1
13
Coolant return
14
Coolant supply
15
Gas connection
16
Mains plug
17
Power switch
18
Gas safety valve (T 0.63)
Fig. 4
Overview of connections and operating elements
1
5
2
17
16
13
4
15
3
14
18
6
10
11
12
8
9
7
NOTICE
• The valve of the shielding gas cylinder must be closed when the gas hose is installed.
• To ensure a tight connection between shielding gas hose and connection, the nut must be tightened
completely using a spanner.
NOTICE
• Applies to liquid-cooled welding torches only.
• Please also consult the operating instructions for the welding components, such as welding torch and
power source.
• Make sure that the coolant supply and return have been installed properly. Coolant supply = blue,
coolant return = red.
• Do not use deionized or demineralised water as coolant or for tightness and flow tests. This may
impair the useful life of your welding torch.
• For liquid-cooled welding torches, we recommend using the
ABICOR BINZEL
coolant of the
BTC series.
