Abicor Binzel ABIDRIVE CW, Руководство по эксплуатации

Страница: 20 / 68

EN - 4
2 Product Description TIG cold wire feeder
2 Product Description
2.1 Designated use
The
ABIDRIVE CW
has been designed for delivering welding filler materials in TIG welding processes. Any
use beyond that is prohibited. Designated use also includes the observance of the prescribed operating,
maintenance and servicing instructions.
2.2 Usage not in accordance with the intended purpose
Any use other than that described under "Designated Use" is considered contrary to the designated use.
Unauthorised conversions or power increase modifications are not allowed.
2.3 Technical Data
The
ABIDRIVE CW
is part of a welding system. The wire required for TIG welding is delivered through the
cable assembly
(8)
and to the manual welding torch
(1)
.
The wire is fed constantly to the TIG arc via a four-roll drive. The TIG arc is produced by an ABITIG manual
welding torch
(1)
and an inverter power source
(5)
.
The components required for welding, such as welding current, shielding gas and coolant, are connected to
the
ABIDRIVE CW (2)
as required. The required welding wire depends on the material to welded and is
taken from the integrated wire spool.
1
Hand-held welding torch
2
ABIDRIVE CW
3
Power supply ABIDRIVE CW
4
Shielding gas cylinder
5
Inverter power source
6
Coolant recirculator
7
Intermediate cable assembly
8
Cable assembly
Fig. 1
System overview
Ambient temperature
- 10 °C to + 40°C
Transport and storage
- 25 °C to + 55 °C
Relative humidity
up to 90 % at 20 °C
Tab. 1
Ambient conditions
Wire feeding unit
approx. 19 kg
Power supply
approx. 7.5 kg
Wire feeding unit
approx. 580 mm

280 mm

380 mm
Power supply
approx. 185 mm

200 mm

175 mm
Tab. 2
Weight, dimensions
LORCH
1 2 3
4
5 6
8
7