Abell Adrenaline 3D V2, Руководство пользователя

Страница: 3 / 19

1) Prepare Motor mounts spars. Find the 16 inch black composite tube and cut two pieces 5
inches long and two pieces 2 inches long . Now find the 4-40 socket head cap screws and screw
one into each motor mount spar. (hint; run the screws all the way in and out several times to form
threads in the tube)
2) Prepare fuselage for motor mount spars. Locate the front fuselage sides (one left and one
right) and the main fuselage. Now glue the motor mount spars into the foam with Abell Hobby
Super-Gold + Foam Safe glue as shown making sure to keep the end of each spar flush with the
edge of the foam. (hint; It may be necessary to clean the machining debris out of the grooves
before you glue the spars in place) Then spray the glue joints with Abell Hobby Insta-Set
Accelerator to cure the glue.
3) Build a beveling tool. A piece of angle aluminum was used in the picture below but you can
build a similar tool using wood or even the spare pieces of foam that are included in the AF37-
V2 kit by simply gluing two pieces of wood or foam together forming a 90 degree angle. Then
glue a piece of 100 or 80 grit sand paper to one side of the angle as shown below.