![background image](http://html1.mh-extra.com/html/abbott/precision-xceedpro/precision-xceedpro_operators-manual_450964058.webp)
9-3
Questions?
Refer to Page 10-9 For Technical Support Instructions.
RS-232 Communications
Cable
Fig. 2 - Connection to Data Management System via Networked PC Running
Data Repeater Software
1. Connect the RS-232 cable to a serial port on a networked PC at the nurses’ station and to the
docking station data transfer port.
2. Ensure that the Networked PC has power and a working network connection. Instructions for installing Abbott Data
Repeater are available separately.
Mounting Instructions
The docking station may be mounted vertically if desired. This operation is similar to mounting a telephone on the wall.
Instructions:
1. Drill the holes to match to the wall mount.
2. Place the wall mount on the wall and insert the four enclosed screws.
3. Align the two holes in the dock station with the two mounting anchors.
4. After aligning the holes, press in and then down to secure the docking station.
Chapter 9: Data Upload
Содержание Precision XceedPro
