![background image](http://html1.mh-extra.com/html/abbott/precision-xceedpro/precision-xceedpro_operators-manual_450964053.webp)
8-9
Questions?
Refer to Page 10-9 For Technical Support Instructions.
System Status
Chapter 8: Review Setup
1.
Press
On/Off
to turn on the monitor.
The Abbott logo screen will appear in black
for a few seconds and then will appear in
gray to ensure that the display is functioning
properly. Next, the software version and then
the
Test Mode
menu screens will appear.
2.
Press the
Menu
button
.
The monitor starts in
Test Mode
. The
Menu
button will toggle the monitor to
Menu Mode
.
3.
Press
2
select
Review Setup
.
4.
Press
2
to continue to the
System Status
Battery Power
screen.
5.
Press
1
-
Next
to continue to the
System
Status Temperature
screen.
6.
Press
1
-
Next
to continue to the
System
Status Time
screen.
What You See on the Display
What You Do
Comments
Note:
This section illustrates some representative settings.
If the monitor does not display these screens, please refer to Chapter 10, Troubleshooting.
Содержание Precision XceedPro
