![background image](http://html1.mh-extra.com/html/abbott/precision-xceedpro/precision-xceedpro_operators-manual_450964028.webp)
5-2
Questions?
Refer to Page 10-9 For Technical Support Instructions.
1.
Press the
On/Off
button to turn the
monitor on.
The Abbott logo screen will appear in black for
a few seconds and then will appear in gray to
ensure that the display is functioning properly.
Next, the software version and then the
Test
Mode
menu screens will appear.
2.
Press the
Menu
button.
The monitor starts in
Test Mode
. The Menu
button will toggle the monitor to
Menu Mode
.
3.
Press
1
to select
Data Review
.
.
4.
Press
Scan
to scan the Operator ID
barcode or manually enter the
Operator ID via the keypad, then press
Enter
.
While the Operator ID may be up to 30 digits,
not all digits will fit on the display. The monitor
may also be set to truncate (ignore) leading,
trailing, and/or selected digits of the barcode.
5.
Choose the category of data to review..
What You See on the Display
What You Do
Comments
Note:
The following section illustrates some common settings. Depending on your institution's specific settings,
some screens will display differently or not at all. If the monitor does not display the screens shown, please
refer to Chapter 10, Troubleshooting.
Follow these steps to access the Data Review menu:
Chapter 5: Data Review
Содержание Precision XceedPro
