![background image](http://html1.mh-extra.com/html/abbott/precision-xceedpro/precision-xceedpro_operators-manual_450964076.webp)
Symbols
There are special symbols that appear on the Precision Xceed Pro Monitor and docking station. The complete list of symbols and
explanations are listed below. Please note: Some of the symbols listed below will not appear on your Precision Xceed Pro Monitor
and docking station due to differences in local regulatory requirements.
Refers to Type BF Equipment, Per EN60601-1.
Refers to Type B Equipment, Per EN60601-1.
The double arrow symbol indicates the connector to be used for data transfer. The double arrow symbol may
appear on the front panel of the docking station, beneath the LED display. (refer to Data Upload, Chapter 9).
Medical Equipment with respect to electric shock, fire and mechanical hazards only in accordance with UL
60601-1, and CAN/CSA 22.2 NO. 601.1
Laser hazard. This product complies with 21 CFR 1040.10 and IEC 60825-1:2001,
CDRH Class II/ IEC Class 2 Laser Product.
Caution: Use of controls, adjustments or performance of procedures other than those
specified herein may result in hazardous laser light exposure.
Class 2 laser scanners use a low power, visible light diode. As with any very bright
light source, such as the sun, the user should avoid staring directly into the light
beam. Momentary exposure to a Class 2 laser is not known to be harmful.
This symbol indicates that this product affords electrical protection as Class II equipment as described in
IEC 601-1 Part 1.
This Way Up.
Represents the limitations of temperature for storage.
This product must not be disposed of via municipal waste collection. Separate collection for electrical
and electronic equipment waste per Directive 2002/96/EC in the European Union is required. Contact the
manufacturer for details.
Lot Number
Expiration Date. Use by YYYY-MM-DD or YYYY-MM.
IMPORTANT: Indicates that inconvenience to the operator may result if the instruction is not followed.
Note: Provides or refers the operator to additional or background information that may be helpful to them.
Do not reuse.
Re-order Number/Catalog Number
Chapter 12: Specifications/Limitations
12-2
Questions?
Refer to Page 10-9 For Technical Support Instructions.
3LAN
This label is permanently
adhered to the back of the
monitor
Содержание Precision XceedPro
