ABB Welcome IP, Системное руководство

Страница: 51 / 82

Commissioning
System Manual 2CKA000073B9795 │51
4.5.2 Add manually
For commissioning you are located in: Setion 2 (Adding devices in the system)
– Section B: (Adding devices)
Overview of commissioning: see chapter 4.1 “Overview of commissioning“
on page 30
Fig. 33: Main menu: Device Management
Use the following steps to add devices manually:
1. Connect a PC with system controller "Smart Access Point" and call up system controller
"Smart Access Point" via a browser.
2. Start the "Device Management" function in the main menu of system controller "Smart
Access Point".
3. Select add devices.
– All located devices are displayed.
4. Enter the following data:
■
Device type
■
Addressing
■
Serial number