ABB SafeGear MCC, Инструкция по установке, эксплуатации и обслуживанию

Страница: 35 / 48

I N S TA L L AT I O N , O P ER AT I O N A N D M A I N T EN A N C E M A N UA L
32
—
Appendix B Main bus assembly
1. Scope/Introduction
This procedure applies to the assembly of the SafeGear MCC main bus at the customer site.
2. Disclaimer
This document was created with the intent of providing a general instruction guide. Models shown in this
document may not match exactly the product you received.
3. Safety practice
Safety glasses, gloves, and steel toe shoes should be used as standard safety practice.
4. Tools required (not supplied)
¾” Wrench ¾” Socket
Socket head
Screwdriver 7/16’’
Torque wrench
9/16” Socket
Ratchet
(½ ‘’ x 13) Bolt.
Length de-pends on
bus rating
(½ - 13) Hex nut (½”) Flat washer (½”) Lock washer
Seal putty Cu bus spacer
(If required)
Cu bus bars
5. Parts required (supplied)