After changing the parameters marked with !, the IED restarts
automatically for the changes to take effect.
4.1.14
Clearing and acknowledging
The Clear button is used to reset, acknowledge or clear all messages and indications,
including LEDs and latched outputs as well as registers and recordings. Press the
Clear button to activate a selection menu, and select the wanted clearance or reset
function. Events and alarms assigned to alarm LEDs are cleared with the Clear button
as well.
1.
Press
to activate the Clear view.
A071214 V3 EN
Figure 28:
Clear view
The content of the Clear menu depends on the pre-configuration or on the
functions configured with PCM600.
2.
Select the item to be cleared with
or
.
3.
Press
, select
OK
to confirm the selection or
Cancel
to cancel the selection,
and press
.
4.
Repeat steps 2 and 3 to clear other items.
4.1.15
Using the local HMI help
1.
Press
to open the help view.
2.
Scroll the text with
or
if the help text exceeds the display area.
3.
To close the help, press
.
The help dialog is also closed when the display timeout expires.
Section 4
1MRS756509 E
Using the HMI
46
630 series
Operation Manual
