Settings for relay functionality......................................................63
Settings for different operating conditions................................... 64
Section 6 Operating procedures.....................................................65
Monitoring.........................................................................................65
Indications................................................................................... 65
Using auto-indication messages............................................ 65
Monitoring alarm data.............................................................66
Monitoring an internal IED fault ............................................. 68
Monitoring condition monitoring data..................................... 68
Measured and calculated values.................................................68
Using the local HMI or Web HMI for monitoring..................... 69
Using PCM600 for monitoring................................................ 69
Recorded data.............................................................................69
Creating disturbance recordings............................................ 70
Monitoring disturbance recorder data.....................................70
Controlling and reading of disturbance recorder data............ 71
Monitoring recorded data....................................................... 72
Monitoring events................................................................... 73
Remote monitoring...................................................................... 73
Monitoring protection relays remotely.................................... 73
Controlling........................................................................................ 74
Controlling circuit breakers and disconnectors............................74
Resetting the IED............................................................................. 75
Clearing and acknowledging via the local HMI............................75
Changing the IED functionality......................................................... 76
Defining the setting group............................................................76
Activating a setting group....................................................... 76
Browsing and editing setting group values.............................78
Activating LEDs........................................................................... 80
Section 7 Troubleshooting .............................................................83
Fault tracing......................................................................................83
Identifying hardware errors..........................................................83
Identifying runtime errors.............................................................83
Identifying communication errors.................................................83
Checking the communication link operation...........................84
Checking the time synchronization.........................................84
Running the display test.............................................................. 85
Indication messages.........................................................................85
Internal faults...............................................................................85
Warnings..................................................................................... 86
Additional indications...................................................................86
Correction procedures...................................................................... 87
Table of contents
630 series
3
Operation Manual
