ABB PCS100 AVC-20 Скачать руководство пользователя страница 6

Страница: 6 / 126

PCS100 AVC-20

User Manual

—

Safety Notices

This manual contains important information regarding the operation of the ABB PCS100 AVC-20. This manual

provides technical and operational guidance for operators. The following safety instructions are to be observed.

This manual contains important information regarding the operation of the ABB PCS100 AVC-

20. This manual provides technical and operational guidance for operators. The following

safety instructions are to be observed.

This manual does not provide sufficient information for safe service of the PCS100 AVC-20. For

such service information refer to appropriate manual.

Please pay due regard to safety as the PCS100 AVC-20s are high energy devices and

require strict precautions to be taken.

CAUTION

–

Trained Operators

All operations on the PCS100 AVC-20 must only be carried out by a trained Operator familiar

with the contents of this manual. Hazardous conditions could arise from incorrect adjustment.

DANGER

–

Hazardous Voltages

An Operator must not open doors or panels marked as containing hazardous voltages. Many

parts in this product, including printed circuit boards operate at lethal voltages. DO NOT

TOUCH components or connections that have voltage present

DANGER

–

Hazardous Voltages

Ensure power to the product is isolated and locked off before attempting any work on it.

DANGER

–

Arc Flash

Shorted terminals can cause arc flash resulting in severe burns, severe eye injury or

blindness. Use insulated tools and do not short any terminals.

Содержание PCS100 AVC-20






























































































































Результаты поиска

Содержание PCS100 AVC-20

Отзывы:

ABB PCS100 AVC-20, Руководство пользователя, Страница: 6 / 126

Результаты поиска

Содержание PCS100 AVC-20

Отзывы: