ABB OmniCore S Series Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 236

ABB OmniCore S Series Скачать руководство пользователя страница 55

3 OmniCore controller operating modes

3.1 Introduction

Overview

The Omnicore controller is delivered with the

Keyless Mode Selector

option. Using

this you can change the operating modes from FlexPendant.

The following operating modes are available:

•

Manual mode, also known as Manual reduced speed mode.

•

Manual high speed mode (not available in USA or Canada).

•

Automatic mode.

The operating modes are described in the product manual for the robot controller.

Note

This behavior of OmniCore controller is different compared to IRC5.

CAUTION

Suspended safeguards shall be returned to full functionality prior to selecting
automatic mode.

Safety aspects of the Keyless Mode Selector

DANGER

Since the mode change and motors on operations are handled from the
FlexPendant, it is physically possible to perform these operations within the
safeguarded space. The user must always make sure to have safety equipment
that is blocking automatic operation while being inside the safeguarded space,
for example an auto stop connected to a gate.

Note

The Keyless Mode Selector is only a part of the robot system. It is the
responsibility of the integrator to do a risk assessment of the robot system.

Operating manual - OmniCore

55

3HAC065036-001 Revision: E

© Copyright 20192020 ABB. All rights reserved.

3 OmniCore controller operating modes

3.1 Introduction

«
...
53
54
55
56
57
...
»

Содержание OmniCore S Series













































































































































































































































Отзывы:

Нет отзывов