ABB OmniCore S Series, Руководство по эксплуатации

Страница: 212 / 236

8.4 Simulating the signals and changing the signal values
Simulating the signals
A signal can be simulated.
Use the following procedure to simulate a signal:
1 On the start screen, tap I/O , and then select Signals from the menu.
2 Use the Filter list or use the search box to navigate to a particular signal.
3 Tap Simulate on the context menu for the signal that is to be simulated.
The signal is changed to a simulated signal.
Note
If there is a cross connection created between two signals, changing the value
of one signal automatically changes the value of the corresponding cross
connected signal.
Changing the signal values
The value of the signal can be changed.
Note
You can change the value of a signal only if that signal is simulated. For more
details about simulating a signal see, simulating signal values.
Use the following procedure to change the value of a signal:
1 On the start screen, tap I/O , and then select Signals from the menu.
2 Use the Filter list or use the search box to navigate to a particular signal.
3 To change the value of a signal:
• For a digital signal, in the Value column tap on the arrow and select
value. 0 - False and 1 - True are the allowed values.
• For an analog signal, in the Value column tap on the arrow. A soft
numeric keyboard is displayed. Type a value between 0 and 10 and
tap
Apply .
212 Operating manual - OmniCore
3HAC065036-001 Revision: E
© Copyright 20192020 ABB. All rights reserved.
8 Handling inputs and outputs, I/O
8.4 Simulating the signals and changing the signal values