ABB OmniCore S Series, Руководство по эксплуатации

Страница: 134 / 236

6.7.2 Creating a work object
What happens when I create a work object?
A variable of the type
wobjdata
is created. The variable’s name will be the name
of the work object. For more information on data types, see Technical reference
manual - RAPID Instructions, Functions and Data types .
This is detailed in section What is a work object? on page 133 .
Creating a work object
The work object’s coordinate system is now identical with the world coordinate
system.
To define the position and orientation of the work object’s coordinate system, see
Work object declaration settings on page 134 .
1 On the start screen, tap Calibrate , and then select Workobject from the
menu.
2 Tap Create New Data in the menu to the right.
The Create Workobject window is displayed.
3 Select the declaration and value parameters and tap Apply .
The work object is created.
Work object declaration settings
Recommendation then... If you want to change...
Work objects are automatic-
ally named
wobj
followed by
a running number, for ex-
ample
wobj10
,
wobj27
.
You should change this to
something more descriptive.
If you change the name of a
work object after it is refer-
enced in any program you
must also change all occur-
rences of that work object.
enter a name in Name the work object’s name
Work objects should always
be global to be available to all
modules in the program.
select the scope of choice
from the menu the scope
Work object variables must
always be persistent.
- the storage type
select the preferred task from
the menu the task
select the module in which
this work object should be
declared from the menu the module
134 Operating manual - OmniCore
3HAC065036-001 Revision: E
© Copyright 20192020 ABB. All rights reserved.
6 Programming and testing
6.7.2 Creating a work object