ABB IRBP, Руководство по эксплуатации продукта

Страница: 155 / 334

4.3 Positioner Interface IRBP C
General
This section describes the I/O configuration for positioner IRBP C
I/O board Configuration for positioner
Re-
lay/Out-
put Ana-
log/Out-
put Ana-
log/In-
put Digit-
al/Out-
put Digit-
al/Input Type Name Address
Simulated digit-
al I/O B_POS_SIM -
- - - 12 7 Digital I/O DRIVO_1
1
Internal
bus
1) The number relates to the drive module where the I/O board is located, the
example shows DM1.
Simulated outputs for B_POS_SIM
Simulated outputs
Description Name UnitMap
Activate mechanical unit 1 soACT_INTCH 0
Simulated inputs
Description Name UnitMap
Mechanical unit 1 activated siINTCH_ACT 0
I/O-Signals configuration for DRIVO_1
Digital outputs TB4
Connected to
unit Description Name UnitMap Output
0 1
1 2
2 3
3 4
Positioner Activate mechanical unit 1 doACT_K5 4 5
5 6
6 7
7 8
8 9
Positioner Activate release break 1 doACT_K15 9 10
10 11
11 12
0 V Output 13
Continues on next page
Product manual - IRBP /D2009 155
3HAC037731-001 Revision: T
© Copyright 2010-2020 ABB. All rights reserved.
4 Configuration
4.3 Positioner Interface IRBP C