ABB FlexTrack IRT501 Series, Руководство по эксплуатации продукта

Страница: 140 / 204

Maintenance schedule
Maintenance activity Interval
Visual inspection First use
Verification of the tightening torque
Visual inspection After the first 500 hours / 3 months
Verification of the tightening torque
Visual inspection Every 3 months
Verification of the tightening torque Every year
Visual Inspection
Every 3 months, remove the necessary FlexTrack and carriage side covers and
inspect the gear. Make sure that there is no mark of wear or damages to the gear,
and that there is no oil leak.
Verification of the tightening torque
Every year, make sure that the tightening torque of the hexagon socket head cap
M6x25 class 12.9 screws that secure the gear to the bracket is 16.5 Nm:
Note/Illustration Action
Separate the carriage bracket holding the gearbox
and motor from the carriage, and move the car-
riage away. For the procedure about how to move
the carriage away, see
Disassemble the bracket
from the carriage on page 155 .
1
Section view:
xx1800001992
The tightening torque of the hexagon socket head
cap M6x25 class 12.9 screws that secure the gear
to the bracket is 16.5 Nm. 2
140 Product manual - FlexTrack IRT501-66/66R/90/90R
3HAW050008590-001 Revision: C
© Copyright 20042018 ABB. All rights reserved.
3 Maintenance
3.6.1 Gear
Continued