ABB FlexTrack IRT501 Series, Руководство по эксплуатации продукта

Страница: 120 / 204

3.2 Standard toolkit
General
All service (repairs, maintenance and installation) procedures contain lists of tools
required to perform the specified activity. All special tools required are listed directly
in the procedures while all the tools that are considered standard are gathered in
the standard toolkit and defined in the table below. This way, the tools required
are the sum of the standard toolkit and any tools listed in the instruction.
Contents, standard toolkit
Tool Qty
Ring-open-end spanner 8--22 mm 1
Socket head cap 2.5 mm, 4 mm, 5 mm, 6 mm, 8 mm and 10 mm 1
Small flat tip screwdriver 1
Plastic mallet 1
Torque wrench 10 Nm-140 Nm 1
Ratchet head for torque wrench 1/2 1
Socket head cap 5 mm, 8 mm, 10 mm socket 1/2" bit L 20 mm 2
Hex head cap 13 mm, 19 mm socket 1/2" bit L 20 mm 2
120 Product manual - FlexTrack IRT501-66/66R/90/90R
3HAW050008590-001 Revision: C
© Copyright 20042018 ABB. All rights reserved.
3 Maintenance
3.2 Standard toolkit