ABB FlexTrack IRT501 Series, Руководство по эксплуатации продукта

Страница: 131 / 204

Required equipment
WARNING
Use lithium soap flowable grease, class NLGI 0, with a mineral oil base, doped
with EP (extreme pressure) additives. The base oil viscosity must be ISO VG68
to ISO VG 100.
Grease doped with EP additives is absolutely necessary, due to high loads on
blocks.
Customers must use the following lubrication suggested by ABB or malfunction
of the lubrication system may occur.
Note Equipment
CASTROL Longtime PD0 Lubricant
KLÜBER Microlube GB0 Lubricant
TOTAL Multis EP 0 Lubricant
WARNING
Battery packs should be changed every time the lubricant cartridge is replaced
to assure proper voltage to the system, and each battery pack should only be
used once only. A new battery pack should be supplied with each replacement
cartridge purchased.
Checking grease level and inspect the pipes
The procedure below details how to check the grease level and inspect the pipes.
Note/Illustration Action
Locate the cartridge. 1
Continues on next page
Product manual - FlexTrack IRT501-66/66R/90/90R 131
3HAW050008590-001 Revision: C
© Copyright 20042018 ABB. All rights reserved.
3 Maintenance
3.5.3 Automatic lubrication system
Continued