ABB ESI-S, Инструкции по установке, эксплуатации и обслуживанию

Страница: 27 / 200

Manual Energy Storage Inverter ESI-S  Hardware description 27
2
3
4
1
5
6
Figure 18 Preload circuit main components
The component identification is given in Table 12 .
Table 12: Preload circuit main components description
Item Description Circuit diagram designation
1 Fuse preload circuit PF1
2 Fuse preload circuit PF2
3 Preload circuit resistors R1
4 Preload circuit resistors R2
5 Capacitors
6
Terminal block for top fans P3
The ESI Main controller board has connectors which are predominantly pre-wired for use
within the inverter. However, it also contains a DIP-switch used to set the identification
address and CAN bus connectors for use in a multi-module inverter arrangements.
The main controller board is shown in Figure 19 .